Power Window Lock Button* - Hyundai i10 Owner's Manual

✽ ✽ NOTICE
The automatic reverse feature for the
driver's window is only active when the
"auto up" feature is used by fully
pulling up the switch. The automatic
reverse feature will not operate if the
window is raised using the halfway posi-
tion on the power window switch.
WARNING
Always check for obstructions
before raising any window to avoid
injuries or vehicle damage. If an
object less than 4 mm (0.16 in.) in
diameter is caught between the
window glass and the upper win-
dow channel, the automatic reverse
window may not detect the resist-
ance and will not stop and reverse
direction.
■ Left-hand drive
■ Right-hand drive
Power window lock button
• The driver can disable the power win-
dow switches on the rear passenger
doors by pressing the power window
lock button located on the driver's door
to the LOCK position (pressed).
Features of your vehicle
• When the power window lock button
is in the LOCK position (pressed),
the driver's master control can oper-
ate the rear passenger door power
windows.
CAUTION
• To prevent possible damage to
the power window system, do not
open or close two windows or
OIA043040
more at the same time. This will
also ensure the longevity of the
fuse.
• Never try to operate the main
switch on the driver's door and
the individual
switch in opposite directions at
the same time. If this is done, the
window will stop and cannot be
opened or closed.
OIA043040R
door window
4 27