Hyundai i10 Owner's Manual page 103

Hide thumbs Also See for i10:
Table of Contents

Advertisement

Features of your vehicle
Auto up/down window (if equipped)
(Driver's window)
Pressing or pulling up the power window
switch momentarily to the second detent
position (6) completely lowers or lifts the
window even when the switch is
released. To stop the window at the
desired position while the window is in
operation, pull up or press down and
release the switch.
If the power window does not operate
normally, the automatic power window
system must be reset as follows:
4
26
1. Turn the ignition switch to the ON posi-
tion.
2. Close the driver's window and contin-
ue pulling up the driver's power win-
dow switch for at least 1 second after
the window is completely closed.
OBA043017L
Automatic reversal (if equipped)
If the upward movement of the window is
blocked by an object or part of the body,
the window will detect the resistance and
will stop upward movement. The window
will then lower approximately 30 cm (11.8
in.) to allow the object to be cleared.
If the window detects the resistance
while the power window switch is pulled
up continuously, the window will stop
upward movement then lower approxi-
mately 2.5 cm (1 in.). And if the power
window switch is pulled up continuously
again within 5 seconds after the window
is lowered by the automatic window
reversal feature, the automatic window
reversal will not operate.
OUN026013

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents