Hyundai i10 Owner's Manual page 381

Maintenance
Turn signal light
1. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
2. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket
3. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
4. Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
7 68
Position light
1. Remove the socket from the assembly
by pulling it straight out.
2. Remove the bulb from the socket by
pulling it out.
3. Insert a new bulb by inserting it into
the socket.
4. Install the socket in the assembly by
pushing it in.
OIA073025
Front fog light bulb replacement
1. Remove the screw of under cover.
2. Reach your hand into the back of the
front bumper.
3. Disconnect the power connector from
the socket.
OIA073038
OIA073039