Using The Tire Mobility Kit - Hyundai i10 Owner's Manual

Using the Tire Mobility Kit

1. Detach the speed restriction label
(0) from the sealant bottle (1), and
place it in a highly visible place
inside the vehicle such as on the
steering wheel to remind the driv-
er not to drive too fast.
2. Screw connection hose (8) onto
the connector of the sealant bottle.
3. Unscrew the valve cap from the
valve of the defective wheel and
screw filling hose (2) of the sealant
bottle onto the valve.
CAUTION
Securely install the sealant fill-
ing hose to the valve. If not,
sealant may flow backward, pos-
sibly clogging the filling hose.
4. Insert the sealant bottle into the
housing (4) of the compressor so
that the bottle is upright.
What to do in an emergency
OIA066016
5. Ensure that the compressor is
switched off, position 0.
6. Plug the compressor power cord
into the vehicle power outlet.
OIA0630008
6 19