Optical Pick-Up Block (Khm-230Aaa/J1Np) - Sony SCD-C333ES Service Manual

3-6. OPTICAL PICK-UP BLOCK (KHM-230AAA/J1NP)

Note: When installing the BU
on the chassis, set the
lever (lifter) in free
position, the gear (U/D)
in UP position, and insert
the shaft into the
b
groove of gear (U/D).
3-7. TABLE ASSY
qa table assy
Note: When installing the table assy
on the chassis assy, engage
the gear (loading C) with the groove
by looking into the gear through
a hole e in the table assy.
3 two screws
(PTPWH M2.6)
BU section
b
gear (U/D)
7 three screws
(BVTP3 × 8)
9 three screws
(BTTP M2.6)
e
2
6 connector
(CN002)
0 bracket (guide)
gear
(loading C)
3
2 two screws
(BTTP M2.6)
1 Slide the tray until the screw
d
c
3 two screws
(PTPWH M2.6)
4 optical pick-up block
(KHM-230AAA/J1NP)
5 four compression springs (932)
1 two screws
(PTPWH M2.6)
8 RF board
7 two screws
(BTTP M2.6)
8 bracket (guide 2)
4 wire (flat type)
(6 core) (CN15)
5 screw
(BTTP M2.6)
6 bracket (guide)
that fixes the bracket (guide)
can be seen through a round
c
hole , d in the table assy.
9