LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. Welcome! Thank you for purchasing the Sony Super Audio CD Player. Before operating the unit, please read this manual thoroughly and retain it for future reference.
Corresponding to that format, the SCD-1 incorporates a large 3-digit display. • The supplied remote is capable of controlling either the SCD-1 and a conventional Sony CD player. (See D COMMAND MODE selector on page 10 and A CD1/ CD2 selector on page 11.)
Getting Started This chapter provides information on the supplied accessories and how to connect various audio components to the Super Audio CD player. Be sure to read this chapter thoroughly before you actually connect anything to the player. Before You Start the Hookup Checking the supplied accessories This player comes with the following items:...
Hooking Up the Audio Components Connect the Super Audio CD player to an audio component. Be sure to turn off the power of all components before making connections and connect securely to prevent noise. Connecting via LINE OUT UNBALANCED jacks Use an audio connecting cord for this connection.
About the Switch Marked “STANDARD” on the rear panel of the player The Super Audio CD includes high frequencies beyond the audible range, although the design of normal amplifiers and speakers is based on characteristics corresponding to the audible range. Therefore, if you increase the volume or treble excessively during Super Audio CD playback, noise may occur or the amplifier’s protect circuit may be activated.
Compatible Disc Types You can play the following discs with this player. Depending on the type of disc to be played, select the appropriate indicator by pressing SACD/CD (pages 8, 12). Super Audio CD (single layer disc) This disc consists of a single HD layer*. Press SACD/CD repeatedly so that the SACD indicator on the upper side of the player lights.
Location and Functions of Parts This chapter tells you about the location and functions of the various buttons and controls on the front and rear panels and the supplied remote. Further details are provided on the pages indicated in parentheses. It also tells you about the information that appears in the display window.
Page 9
7 x button (13) Press to stop play. 8 l/L button (13) Each time you press l, you go back to the preceding track; each time you press L, you go to the succeeding track. 9 Display window (Remote sensor Shows various information.
CD2. In this case, you can control both the other Sony CD player and this player with CD1/CD2 on the remote. Set to CD1 to control the other Sony CD player, or CD2 to control this player. BALANCED...
1 CD1/CD2 selector Select when you connect a Sony CD player other than this player. Set to CD1 to control the other Sony CD player, or CD2 to control this player. In this case, you have to set the COMMAND MODE selector on the rear panel to CD2.
Playing Discs This chapter explains the various ways to play discs. Playing a Disc The operations for normal play and the basic operations during play are explained below. SUPER AUTO CD CD TIME TEXT DIGITAL DUT FILTER MANUAL SELECTOR SACD/CD (power) Turn on the amplifier.
Basic operations during play Press Stop play Pause play Resume play after pausing X or H Locate a succeeding track Locate the beginning of the current track or a preceding track Eject the disc If you turn on the player when a disc is already loaded Playback starts automatically.
Page 14
Using the Display Displaying information while the player is playing Press TIME. Each time you press the button, the current track number and its elapsed time or remaining time appears, or the total remaining time for the disc appears in the display. Playing track number and elapsed playing time of the current track (default display) Press TIME...
Displaying the information of a TEXT disc in other languages You can change the displayed language if the TEXT disc has multi language capacity. When the player detects such a TEXT disc, “TEXT” and “MULTI” appear in the display. Change the language according to the procedures below. Press LANGUAGE in stop mode.
Locating a Particular Point in a Track Z You can locate a particular point in a track during play or play pause. Locating a point while monitoring the sound (Search) Press and hold m/M during play. You will hear intermittent playback as the disc goes forward or reverses.
Repeating the current track (Repeat 1 Play) While the track you want to repeat is being played, press REPEAT repeatedly until “REPEAT 1” appears in the display. Repeat 1 Play starts. To stop Repeat 1 Play Press x. To resume normal play Press REPEAT repeatedly until “REPEAT”...
Creating Your Own Programme (Programme Play) You can pick out the tracks that you like and specify the playback order in a programme containing up to 99 tracks (or 999 min. 59 sec. in total programme time) CONTINUE Number buttons >10 Press PROGRAM in stop mode.
Listening to a CD Using a Filter (Digital Filter Function) This player is equipped with a variable coefficient (V.C.*) digital filter. By selecting one of five types of filters (“STD,” “1,” “2,” “3,” and “4”), you can adjust the sound to match your listening environment and the music source.
Additional Information This chapter provides additional information that will help you understand and maintain your Super Audio CD player. Precautions On safety • Caution — The use of optical instruments with this product will increase eye hazard. • Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further.
If you have any questions or problems concerning your player, please consult your nearest Sony dealer. Notes on Discs On handling discs • To keep the disc clean, handle the disc by its edge. Do not touch the surface.
If you experience any of the following difficulties while using the player, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. There is no sound. , Check that the player is connected securely.
Index Accessories 4 Amplifier (not supplied) 6 AMS (Automatic Music Sensor) 15 Batteries 4 Cable Coaxial digital 5 Optical digital 5 Cord Audio connecting 5 XLR (balanced) 5 D, E Digital filter 19 DIGITAL OUT 5 Displaying information 13 F, G Filter 19 H, I, J, K Hooking Up...
Page 24
LA CLASSE 1 est apposée à l’arrière du boîtier. Bienvenue! Nous vous remercions d’avoir fait l’acquisition d’un lecteur Super Audio CD Sony. Avant de faire fonctionner cet appareil, lisez attentivement le présent mode d’emploi et conservez-le pour toute référence ultérieure. A propos de ce mode d’emploi...
SCD-1 comporte une fenêtre largement dimensionnée à 3 chiffres. • La télécommande fournie est capable de commander le SCD-1 et un lecteur classique Sony. (Voir D Sélecteur COMMAND MODE à la page 10 et A Sélecteur CD1/ CD2 à la page 11.) ABLE DES MATIÈRES...
Préparation Ce chapitre présente des informations sur les accessoires fournis ainsi que sur le raccordement de différents composants audio au lecteur Super Audio CD. Lisez attentivement ce chapitre avant de raccorder quoi que ce soit au lecteur. Avant d’entamer les raccordements Vérification des accessoires fournis Ce lecteur est fourni avec les éléments suivants :...
Raccordement de composants audio Raccordez le lecteur Super Audio CD à un composant audio. Veillez à mettre tous les composants hors tension avant de procéder aux connexions et raccordez-les fermement de manière à éviter les bruits de souffle. Raccordement via les prises LINE OUT UNBALANCED Utilisez un câble de connexion audio pour effectuer ce raccordement.
A propos du commutateur “STANDARD” du panneau arrière du lecteur Le Super Audio CD comporte des hautes fréquences au- delà de la plage audible, bien que la conception des amplificateurs et des haut-parleurs normaux repose sur des caractéristiques correspondant à la plage audible. Par conséquent, si vous augmentez le volume ou les aiguës de manière excessive pendant la lecture d’un Super Audio CD, des parasites peuvent se produire ou le circuit...
Types de disques compatibles Vous pouvez reproduire les types de disques suivants sur ce lecteur. Suivant le type de disque à reproduire, sélectionnez l’indicateur approprié en appuyant sur SACD/CD (pages 8, 12). Super Audio CD (disque à simple couche) Ce disque est constitué d’une simple couche HD*. Appuyez plusieurs fois de suite sur SACD/CD de façon à...
Emplacement et fonction des composants Ce chapitre présente une description de l’emplacement et des fonctions des différentes touches et commandes des panneaux avant et arrière ainsi que de la télécommande fournie. Pour plus de détails, reportez-vous aux pages indiquées entre parenthèses. Il explique également les informations apparaissant dans la fenêtre d’affichage.
Page 31
7 Touche x (13) Appuyez sur cette touche pour arrêter la lecture. 8 Touche l/L (13) Chaque fois que vous appuyez sur la touche l, vous revenez à la plage précédente; chaque fois que vous appuyez sur la touche L, vous passez à la plage suivante.
CD Sony autre que ce lecteur, réglez-le sur CD2. Dans ce cas, vous pouvez commander l’autre lecteur CD Sony et ce lecteur à l’aide des touches CD1/CD2 de la télécommande. Réglez-le sur CD1 pour commander l’autre lecteur CD Sony ou sur CD2 pour commander ce lecteur.
Sélection d’un lecteur CD Sony autre que ce lecteur. Réglez-le sur CD1 pour commander l’autre lecteur CD Sony ou sur CD2 pour commander ce lecteur. Dans ce cas, vous devez régler le sélecteur COMMAND MODE du panneau arrière sur CD2.
Lecture de disques Ce chapitre présente les différents modes de lecture des disques. Lecture d’un disque Les opérations de lecture normale et les opérations de base en cours de lecture sont expliquées ci-après. SUPER AUTO CD CD TIME TEXT DIGITAL DUT FILTER MANUAL SELECTOR SACD/CD (alimentation)
Opérations de base en cours de lecture Pour Appuyez sur Arrêter la lecture Activer une pause de lecture Reprendre la lecture après une pause X ou H Localiser l’une des plages Localiser le début de la plage en cours ou de l’une des plages précédentes Ejecter le disque Si vous mettez le lecteur sous tension alors qu’un disque se...
Page 36
Utilisation de la fenêtre d’affichage Affichage d’informations en cours de lecture Appuyez sur TIME. Chaque fois que vous appuyez sur cette touche, le numéro de la plage en cours et sa durée écoulée ou encore la durée restante totale du disque apparaît dans la fenêtre d’affichage.
Affichage des informations d’un disque TEXT pendant la lecture d’un disque Le numéro de la plage en cours apparaît. Si le titre du disque comporte plus de 16 caractères, les 15 premiers caractères restent après que le titre a défilé dans la fenêtre d’affichage.
Localisation d’un passage déterminé sur une plage Z Vous pouvez localiser un passage déterminé sur une plage en cours de lecture ou de pause de lecture. Localisation d’un passage tout en contrôlant le son (recherche) Maintenez les touches m/M enfoncées en cours de lecture.
Répétition de la plage en cours (lecture répétée d’une plage unique) Pendant la lecture de la plage que vous voulez répéter, appuyez plusieurs fois de suite sur REPEAT jusqu’à ce que l’indication “REPEAT 1” apparaisse dans la fenêtre d’affichage. La lecture répétée de cette plage démarre. Pour arrêter la lecture répétée d’une plage unique Appuyez sur x.
Création de votre propre programme musical (lecture programmée) Vous pouvez sélectionner les plages que vous préférez et spécifier leur ordre de lecture dans un programme musical pouvant contenir jusqu’à 99 plages (ou 999 min. 59 sec. de durée totale pour le programme) CONTINUE Touches numériques...
Ecoute d’un CD avec un filtre (fonction de filtre numérique) Ce lecteur est équipé d’un filtre numérique coefficient variable (V.C.*). En sélectionnant l’un des cinq types de filtres (“STD”, “1”, “2”, “3” ou “4”), vous pouvez ajuster le son en fonction de votre environnement d’écoute et de la source musicale.
Informations complémentaires Ce chapitre fournit des informations complémentaires sur le fonctionnement et l’entretien de votre lecteur Super Audio CD. Précautions Sécurité Attention — Les instruments optiques qui équipent cet appareil sont dangereux pour les yeux. Si un objet ou un liquide quelconque pénètre à l’intérieur du boîtier, débranchez le lecteur et ne l’utilisez plus avant de l’avoir fait contrôler par un personnel qualifié.
Si vous éprouvez la moindre difficulté concernant votre lecteur, n’hésitez pas à consulter votre revendeur Sony. Remarques sur les disques Manipulation des disques • Pour que les disques restent propres, saisissez-les par le bord.
Si le problème persiste, consultez votre revendeur Sony. Pas de son. , Vérifiez si le lecteur est correctement raccordé. , Assurez-vous que vous exploitez correctement l’amplificateur.
Index A, B Accessoires 4 Affichage d’informations 13 Amplificateur (non fourni) 6 AMS (détecteur automatique de musique) 15 Câble connexion audio 5 numérique coaxial 5 numérique optique 5 XLR (symétrique) 5 D, E DIGITAL OUT 5 F, G Filtre 19 Filtre numérique 19 H, I, J, K Introduction d’un disque 12...
Need help?
Do you have a question about the SCD-1 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers