Manual Dial - HYT TC-780M Manual

Programming
The radio is programmed with the dedicated programming cable and software. Operations are as follows:
1. Connect the radio to the PC serial port with the programming cable.
2. Power on the radio.
3. Run the programming software.
Remove the programming cable after programming is completed.
Precautions:
1. Install the programming software into your computer first.
2. Many functions can be set via the programming software. Read the Help File of the programming software carefully
before programming.

Manual Dial

The radio supports CPSX and MPT1343 numbering schemes. PABX call, PSTN call, emergency call, priority call, call
forward and any group call can be made only when the corresponding right is programmed.
If Fleet Individual Call Inhibit is set in the programming software, individual calls are prohibited on the corresponding fleet. If
Fleet Group Call Inhibit is set, group calls are prohibited on the corresponding fleet. This setting can limit the user's call right.
CPSX Manual Dial
1. Radio to Radio
The radio can make radio-to-radio individual call and group call. After Any Group Call Right is programmed, any group call
can be made. If there is no any group call right, the radio can only transmit calls in the group call list.

In-fleet Individual Call
3-digit ID number (200～899) +

In-fleet Group Call
3-digit group call number (900～999) +

Fleet-wide All Call
#

Inter-fleet Individual Call
#
or PTT
#
or PTT
or PTT
29