Table of Contents
Advertisement
Message List
Message List
This is a list of messages recorded to the printer's system log. The system log can be viewed
using the syslog command.
System Log Information
You can use the following methods to view the system log.
Message when Network Interface Card Starts or Restarts
6 - 22
mshell
Network Configuration Page: Configure PCL for the Printer Language, and push the switch
on the Network Interface Card for five seconds.
Item Name
LANIER Network Interface Card ver.x.x.x
PRINTER SYSTEM "System Name"
ver.x.x.x
Attach FileServer="file server name"
Current Interface Speed:xxxMbps
Current IPX address
FrameType="frame type name"
NetBEUI Computer Name="compter
name"
Start httpd
Start npmpd for IPX
Start npmpd for TCP/IP
Start smpd direct print mode (NetBEUI)
Start snmpd Ver 2.0
Vendor=, Country=, Lang=
Description
Version number of the NIC
System name and version of the printer
Printer is attached to "file server name"
as the nearest server
Speed of the network (10Mbps or 100
Mbps)
Current IPX address
Frame type name is configured to be
used on NetWare.
NetBEUI Computer Name is defined as
computer name.
Web server has been started.
npmpd for IPX protocol has be started.
npmpd for TCP/IP protocol has be
started.
You can print from a client on the
Windows network via the print server.
SNMP agent of the displayed version has
been started.
Vendor, country code, and language.
Additional Functions
Advertisement
Table of Contents
