Lanier 5222 Operator's Manual page 86

Message List
When Using SNMP
6 - 26
Item Name
Exit snmpd
recvfrom: packet discarded, length
(reception packet length) > (Packet
size), from addr <Address of partner
point>
session <Community name appointed>
Name> from <Address>
snmpin: Bad use of session
<community Name> from <Address>
snmpin: error in snmpdecipher, code
(<ErrorNo.>)
snmpin: error in snmpservsend, code
(<ErrorNo.>)
snmpin:pkt too large,code (<Error
number>)
snmpin: error in sending too large
request back,code (<Error
number>),giving up
snmpin:received bad version
Description
The agent is complete. Reset the printer
or turn the printer off and on.
The received packet was ignored since
the length of the packet exceeds the
limit. Confirm whether the administrator
station sent a packet whose length is
longer than 1025 bytes.
The community name of the received
packet is not defined. Confirm that the
community name of the administration
station is the same as that specified to
the printer.
The community name of the received
packet is not the same as that of the
administration station. Confirm the
community name specified to the
printer.
An error occurred on the received
packet. Check if the number of the
objects sent from the administration
station ism ore than 31 and if there are
wrong MIB requests.
Cannot send a response packet.
Normally this message is followed by
other messages.
The response packet to the request is
too big to send. Reduce the number of
the objects per request.
The packet notifying the error is too big
to send. Reduce the number of the
objects per request.
The version of the received packet is
invalid. Confirm that the version of the
administration station is the version -
1(0).
Additional Functions