Remote Maintenance by Telnet (mshell)
Status of Printer
The following commands can be used to get information about the current status of the printer.
Note:
5
Information about the Network Interface Card Configuration Settings
Use the show command to display the Network Interface Card configuration settings.
Note:
System Log Information
Use the syslog command to display information stored in the printer's system log.
6 - 12
msh> command
•
More information on the print job is displayed when the ID number is added after the
prnlog command.
msh> show [-p]
•
Add "-p" to the show command to have the information displayed one screen at a time.
Note: msh> syslog
Command
status
info
prnlog (ID)
netstat
Information that is
Displayed
Status of printer.
Information about the print
job.
Information about the paper
tray, output tray, emulation
and program of printer.
Lists the last 10 print jobs
Information on NIC
Additional Functions