Frequently Asked Questions - Miele H 4080 BM Operating Instructions Manual

Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable national and local codes
and standards.
Repairs and other work by
unqualified persons could be
dangerous and may void the
warranty.
The following faults can be corrected
without contacting the Miele Service
Department:
Why is the display dark when the
oven is first turned on?
^ Possible fault
– the appliance is correctly plugged in,
– The circuit breaker has tripped.
Check the breaker.
– The display setting is set to "Off after
1 minute". See "Settings - Clock
display".

Frequently asked questions

What if the oven does not heat?
^ Possible fault
– Close the door firmly.
– Select a watt and time setting for the
microwave function.
– Select a watt and a time setting for
the microwave and a temperature
setting for a traditional function.
Why is there no noise when the oven
door is opened during operation with
traditional function?
This is normal. If the door is opened
during operation, a safety contact
switch causes the heating elements
and the fan to shut off.
Why is a noise heard after turning the
oven off?
This is normal. The fan will continue to
run for a short time to cool the oven.
When the oven has cooled sufficiently,
the fan will turn off automatically.
The fan will stop when the door is
opened during the cooling phase. The
fan will continue when the door is
closed again until the cooling phase is
finished.
65