Setting The Hdmi Audio Mode; Picture Adjustment - Toshiba 24PB2 Series Owner's Manual

Setting the HDMI Audio mode

You can select sound of an HDMI or DVI device
connected to the HDMI input terminals from
three modes: Auto, Digital or Analogue.
• Use menus: SETUP and AV Connection
• Use the item: HDMI Audio

Picture adjustment

Selecting the Picture Size
1
Press until the Picture Size list
appears on the screen, then press  or 
to select the appropriate Picture Size (or
press repeatedly to select the desired
Picture Size directly).
2
Press Q.
Native
This setting will display the image correctly
without distortion or picture clipping.
Wide
Use this setting when watching a wide-screen
DVD, widescreen video tape or a 16:9 broadcast
(when available). Due to the range of wide-
screen formats (16:9, 14:9, 20:9 etc.), you may
see bars on the top and bottom of the screen.
4:3
Use this setting to view a true 4:3 broadcast.
Super Live
This setting will enlarge a 4:3 image to fi t the
screen by stretching the image horizontally
and vertically, holding better proportions at the
centre of the image. Some distortion may occur.
Cinema
When watching "all sides panel format" fi lms/
video tapes, this setting will eliminate or reduce
the black bars on all the sides of the screen
by zooming in and selecting the image without
distortion.
Subtitle
When subtitles are included on a letterbox
format broadcast, this setting will raise the
picture so that the most of text is displayed.
14:9
Use this setting when watching a 14:9 broadcast.
PC Normal (only HDMI signal input)
Use this setting for PC connected via HDMI
or RGB/PC terminal when receiving PC signal
format. This setting will display the image
correctly without distortion or picture clipping.
PC Wide
Use this setting for PC connected via HDMI
or RGB/PC terminal when receiving PC signal
format. This setting will display the image
without picture clipping.
Dot by Dot
"Dot by Dot" is a non-scaling display. Depending
on the input signal format, the picture is
displayed with side panels and/or bars at the top
and bottom (i.e. VGA input source).
– 12 –
Subtitle