Using The Pc Setting - Toshiba 22EV700E Owner's Manual

Using.the.PC.Setting
• This function may not be available for some
signal or if no signal is received.
• The optimum points of the clock phase and
sampling clock adjustments may be incompre-
hensible according to the input signals.
Adjusting.the.picture.position
An analogue RGB (1 pin) computer cable can
be connected.
Press MENU then press t or u to display
1
the SET UP menu.
2
Press p or q to select the item you want
to adjust.
Language
Automatic Power Down
AV connection
Horizontal position
Vertical position
Sampling clock
Clock phase
Auto Adjust
OK
Enter
2
Press p or q to select an option you want
to adjust. Press t or u to adjust the set-
tings as required.
Horizontal position
Adjusting.the.sampling.clock.
If the sampling clock does not match with the dot
clock frequency of the PC, blurred picture detail
will occur, or screen width will change, or drift
patterns in vertical lines may be apparent.
This function enables you to adjust it and
optimize the picture.
1
From the SET UP menu, press p or q to
select Sampling clock.
2
Press t or u to optimize the picture.
6
Connecting your TV
SET UP
English
Off
OK
100
100
100
0
OK
Back
RETURN
97
Adjusting.the.clock.phase.of.the.picture.
If the clock phase, which synchronize the PC
signal and LCD display, is not optimized, the
picture will blur.
This function enables you to adjust clock phase
and display a clear picture.
1
From the SET UP menu, press p or q to
select Clock phase.
2
Press t or u to obtain a clear picture.
Auto.Adjust.
The Auto Adjust window appears when the PC
signal is detected for the first time. Auto Adjust
configures the Horizontal position, Vertical
position, Sampling clock and Clock phase
settings.
1 From the SET UP menu, press p or q to
select Auto Adjust.
2
Press . The Auto Adjust window ap-
pears.
Note:
In the HDMI1/2 input mode, Auto Adjust is not
available.