2
Precautions for using the Touch Panel
This machine features a capacitance-base touch panel. Note the following points when operating the Touch
Panel.
-
Use your finger or the Stylus Pen supplied with this machine. Note that the Touch Panel will not re-
spond appropriately if you operate it using your nail or a pen tip instead of your finger or the Stylus Pen.
-
Applying a strong force to the Touch Panel will damages the Touch Panel, and potentially cause a
breakage.
-
When operating the Touch Panel, do not press on it using excessive force or with a pointed object such
as a mechanical pencil.
-
Be careful not to operate Touch Panel with wet fingers. It may cause Touch Panel to be improperly
operated.
-
If you operate the Touch Panel with a gloved finger, the Touch Panel will not respond normally. You
should operate it with a bare finger or using the Stylus Pen supplied with this machine.
-
Note that the Touch Panel may not respond normally if the distance between the user and fluorescent
light is 19-11/16 inches (500 mm) or less when you operate the Touch Panel.
-
You must not use the Touch Panel near equipment that generates electrical noises such as an electric
generator or air conditioner. Otherwise a malfunction may be caused by an influence of electrical nois-
es.
2-38
Touch Panel
bizhub C658/C558/C458/C368/C308/C258
2.6
Need help?
Do you have a question about the bizhub C658 and is the answer not in the manual?