3.2
Scan-to-Send function
Checking the cable connection
Check that a LAN cable is connected to the LAN port of this machine and the green LED is on.
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Check that the IP address is displayed.
Tips
-
If no IP address is displayed, you need to set up the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide CD.
-
For information on the default administrator password, refer to page 5-53.
bizhub C658/C558/C458/C368/C308/C258
3
3-27
Need help?
Do you have a question about the bizhub C658 and is the answer not in the manual?