Ejecting A Pc Card - Fujitsu LifeBook C6659 Manual

1. Install the PC card.
Insert the PC card fully into the PC card slot with the product name label facing up.
PC card
2. If the PC card is being installed for the first time, install any necessary driver.
Some PC cards require the installation of a driver. Check the manual supplied with each PC
card and install a driver if required.
A floppy disk or a CD may be required to install a driver.
Critical Point
If a message appears asking whether you want to restart the computer, after you have
removed a PC card driver, follow these steps.
1. Click No in the message window asking whether to restart the computer.
2. Click the Start button and select Turn Off Computer. In the Turn Off Computer dialog box,
select Turn Off. The computer shuts down.
3. Eject the PC card.
Do not put anything heavy on, or apply a shock to, the connector of the cable connected with
the PC card, or it may damage the equipment.

Ejecting a PC Card

Here is the explanation of how to remove a PC card.
Critical Point
When you remove a PC card attached with a cable, do not pull the cable connected to the
PC card or it will result in failure.
When you remove a PC card, follow the procedure below or it will result in failure.
Some PC cards require shutting down when you remove them. Consult with the manual of
the PC card.
188
PC card slot