Fujitsu LifeBook C6659 Manual page 83

Critical Point
If the tray won't come out:
- When Windows is terminated, switch to Disc mode, then press the Eject button.
- If the MAIN switch is off (in the O position), slide it to the | position to turn the power on,
and then press the EJECT button.
You may press the EJECT button even when the
You can stop it from blinking if you want.
4. Take out the disc while holding the tray with a hand.
To detach the disc, lift the edge of the disc while holding the projection with a finger, as shown
below.
Disc tray
5. Push in the tray gently until it clicks into place.
Projection
icon on the CoolView Panel is blinking.
65