Connecting A Usb Mouse - Fujitsu LifeBook C6659 Manual

Connecting a USB mouse

Through the USB port, you can connect an optional USB mouse to your computer.
1. Plug the USB mouse cable in a USB port on the back of the computer.
Insert straight the cable connector in the USB port in correct orientation.
USB port
(The illustration varies depending on the model and use conditions.)
Critical Point
A USB mouse can be connected and disconnected even when the computer is on.
Connecting a USB mouse does not automatically disable the Flat Point. To disable the Flat
Point, follow the steps described in the next section, "Disabling the Flat Point."
Disabling the Flat Point
When a USB mouse is connected to your computer, not only the mouse but also the Flat Point
are enabled. To disable the Flat Point, follow these steps.
1. Select "Manual" under "Internal pointing device" of the BIOS Setup window.
2. After Windows starts, press the
The Flat Point switches between Enabled and Disabled each time you press the
holding the key down. When you activate or deactivate the Flat Point, the message "Internal
pointing device: Enabled" or "Internal pointing device: Disabled" appears on the screen, respectively.
key while holding the key down.
key while
207