Using Walkin Function - Fujitsu LifeBook C6659 Manual

Using WalkIn Function

This section describes how to configure the WalkIn function, which enables an automatic
connection.
The WalkIn function is a function, which operates a connection regularly to registered Bluetooth
devices. When a registered Bluetooth
connecting operation is automatically done.
Setting-Up of WalkIn Function
1. Click (Settings), when not connected to Bluetooth
2. (1) Click "WalkIn settings", (2) tick the check box next to "Enable WalkIn function",
then (3) click the "Add" button.
3. (1) Click the drop-down list
device to connect to, (2) select "Service of remote device to be connected:", then (3) click
the "OK" button.
Critical Point
All the service Plugfree supports are displayed. Select the service available for your counterpart
Bluetooth TM device.
150
TM
device enters or is in the Bluetooth
next to "Connected remote device:" to select a Bluetooth
(3)
TM
connection area,
TM
device.
(1)
(2)
(3)
(1)
(2)
TM
TM