Connect A Wireless Client To Your Router; Wps Button - D-Link DVA-5582 User Manual

Section 5 - Connecting to a Wireless Network

Connect a Wireless Client to your Router

The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DVA-5582 router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DVA-5582 for about 1 second. The WiFi LEDs on the front will start to blink orange.
Step 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS
process).
Step 3 - Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be connected
and your wireless connection will be secure with WPA2.
D-Link DVA-5582 User Manual

WPS Button

WPS Button
106