Physical Wan Interface - D-Link DVA-5582 User Manual

Section 3 - Configuration
Configuration Wizard: Phase 1 (Cont.)

Physical WAN Interface

Physical WAN This menu asks you to choose which physical interface your Internet
Interface: connection comes from.
DSL Line (DSL):
Select this interface if you use an xDSL connection. This connection
type uses an RJ-11 (telephone) cable plugged into the gray port on
the back of your router. For details on the DSL Line (DSL) configuration
procedure, see DSL Line Configuration Wizard on page 14.
WAN Ethernet
Choose this connection type if your Internet is delivered over an RJ-45
(Eth1-5):
(Ethernet) connection. If your WAN connection is connected to the
purple port on the back of the device labelled WAN GbE, then you
should select WAN Ethernet (Eth5). For details, see WAN Ethernet
Configuration Wizard on page 17.
USB Interface (USB): Choose this interface if your primary Internet connection comes from
a 3G/4G dongle or other USB device. For details, see USB Interface
Configuration Wizard on page 18.
The subsequent steps will be different depending on the type of interface selected.
Click Next to start the configuration wizard, or Cancel to return to the homescreen.
D-Link DVA-5582 User Manual 12