Wireless Access Point - D-Link DVA-5582 User Manual

Section 3 - Configuration

Wireless Access Point

Phase 2 of the configuration Wizard allows you to configure your Wi-Fi Access Points.
To continue, click Next and follow the instructions presented on the next page.
Status: Indicates whether the interface is Up or Down.
Enable Access Select Yes to enable the Wi-Fi access point. Selecting no will disable
Point:
Wi-Fi.
Name (SSID):
SSID Broadcast: Select Yes to broadcast the SSID. Selecting No will require all devices
wishing to connect to your network to enter the SSID manually in
addition to any security
AP Isolation: Select Yes to isolate the wireless network from other devices on the
LAN while retaining internet access. The default is No.
Security Mode: Select an encryption mode to help protect your Wi-Fi network from
being accessed by unauthorized devices. WPA2 Personal is the
default and recommended mode. WEP and older WPA standards
are less secure and provided for compatibility with older devices.
WPA Passphrase:
Choose a strong password to help protect your network. The longer
and harder to guess a password is, the stronger the protection. The
password can be any letter, number, symbol, or space. Accent marks
and non-ASCII characters are not supported. Passwords must be at
least 8 characters.
Show Password:
This option shows the password as you type it..
D-Link DVA-5582 User Manual
Wi-Fi Security Settings
28