D-Link DVA-5582 User Manual page 18

Section 3 - Configuration
DSL Link Type: This menu asks you to choose which physical interface your Internet
connection comes from. The options are ATM (Asynchronous
Transfer Mode) and PTM (Packet Transfer Mode). This information
will be provided by your ISP.
DSL Channel:
Select this interface if you use an xDSL connection. This connection
type uses an RJ-11 (telephone) cable plugged into the gray port on
the back of your router.
Choose this connection type if your Internet is delivered over an RJ-
45 (Ethernet) connection. If your WAN connection is connected to
the purple port on the back of the device labelled WAN GbE, then
you should select WAN Ethernet (Eth5).
Choose this interface if your primary Internet connection comes from
a 3G/4G dongle or other USB device.
If you have selected ATM (Asynchronous Transfer Mode) for the DSL Link Type,
clicking Next will take you to ATM Configuration on page 14.
If you have selected PTM (Packet Transfer Mode) for the DSL Link Type, see Ethernet
Layer Settings (IP Encapsulation) on page 15.
Click Cancel to return to the homescreen, or Back to return to the previous screen.
D-Link DVA-5582 User Manual
DSL Link Type
13