Table of Contents
Advertisement
Quick Links
User Guide
8ft (2.44m) Trampoline
Got a Problem building your trampoline?
Call us on 0344 800 4060 and we can help
Patent no: DE602006006495D1, EP1721640B1 and US7628731
WARNING: Read these assembly instructions carefully
before attempting to assemble or use this product. Keep
this user guide in a safe place for future reference.
Advertisement
Table of Contents
Related Manuals for Jumpking 8ft (2.44m) Combo Trampoline
Summary of Contents for Jumpking 8ft (2.44m) Combo Trampoline
- Page 1 User Guide 8ft (2.44m) Trampoline Got a Problem building your trampoline? Call us on 0344 800 4060 and we can help Patent no: DE602006006495D1, EP1721640B1 and US7628731 WARNING: Read these assembly instructions carefully before attempting to assemble or use this product. Keep this user guide in a safe place for future reference.
- Page 2 IMPORTANT INFORMATION . WARNING! ADULT SUPERVISION & GUIDANCE REQUIRED AT ALL TIMES. . Recommended age 6+ years. . No somersaults or flips - can cause serious injury. WARNINGS! . Only for domestic use. . Max 50 kg. The trampoline shall be assembled by an adult in accordance with the assembly instructions and thereafter checked before the first use.
- Page 3 USING YOUR TRAMPOLINE before using the trampoline (see spare parts page 20). before bouncing. and guidance. Jump without shoes. In certain countries during winter period, the snow load and the very low temperature can damage the trampoline. It is recommended to remove the snow and store the mat and the enclosure indoor. BOUNCING SKILLS Fundamental Bounce Knee Drop...
-
Page 4: Care And Maintenance
CARE & MAINTENANCE Regular care and maintenance of your trampoline is required. This will help prolong its life and reduce the possibility of injury. Neglecting this can lead to a risk for users. Inspect your trampoline before each use using the checklist below as a guide. Take particular care in doing this at the start of each season and at regular intervals. -
Page 5: What You Will Need
BUILDING YOUR TRAMPOLINE 1. This is a 2 person build. 2. Time for build is approximately 2 hours. 3. Choose a good location: (wood chippings, sand or grass). (7.3m) from ground level, away from wires, trees and other possible hazards. (2.5m) around sides, away from walls, fences, structures, tarmac and other hard surfaces and play areas. -
Page 6: Parts List
PARTS LIST Part Part Part Part Description: Description: Top Tube with Description: Description: Leg extensions T-Connector+welded Centre legs Stitched bed Quantity: 6 tube Quantity: 6 Quantity: 3 Quantity: 1 Part Part Part Part Description: Description: Description: Description: Springs Spring tool Frame pad Top enclosure poles Quantity: 42... -
Page 7: Step 1 : Assembling The Frame
STEP 1 : ASSEMBLING THE FRAME You will need the following parts to complete Top tube section 1: 6 x Top Tubes with T-connector+welded tube - Part A 6 x Leg Extensions - Part B Leg extension 3 x Centre legs - Part C 12 x Self tapping screws &... - Page 8 Slot another leg extension onto the other end of the centre leg. Important: The frame is held together under tension so you will have to use some force to insert certain parts. Place your feet on the top tubes and grip the leg extension with both hands.
- Page 9 STEP 2 : ASSEMBLING THE FRAME This step will require 2 people who must be wearing gloves. Slot two of the frame section together as shown in the diagram. Whilst one person holds the assembled sections upright, the other person can slot a second section onto the end of the assembled sections.
- Page 10 STEP 3 : FITTING THE STITCHED BED This step will require 2 people who must be wearing gloves and protective eye wear. Lay the stitched bed (with the V-Rings) out inside the frame of the trampoline with the warning labels facing upwards.
- Page 11 Attach a spring to the opposite yellow stitched V-Ring. Important: You will now need to use the spring tool to attach the spring to the frame. Hook the spring tool onto end of spring, and pull until the spring can be slotted into the spring slot on the top of the frame.
- Page 12 STEP 4 : FITTING THE FRAME PAD This step will require 2 people. Lay the frame pad - Part G out over the edge of the frame with the ties facing downwards. Align the openings in the frame pad with the T-connector+welded tube's on the frame.
- Page 13 STEP 5 : FITTING THE ENCLOSURE TUBES Top enclosure tube You will need the following parts to complete step 5: 6 x Top enclosure tubes - Part H Bottom enclosure tube 6 x Bottom enclosure tubes - Part I 6 x Self tapping screws and washers - Part J Self tapping screw and washer You will also need a cross-head screwdriver (not supplied).
- Page 14 Slot the bottom enclosure tube into the tubes in the T-connector+welded tubes visible through the slots in the frame pad. Assemble the seven remaining enclosure tubes using the the self tapping screws and the cross-head screwdriver. Slot the 5 remaining enclosure tubes into the remaining T-connector+welded tube's on the frame.
- Page 15 STEP 6 : FITTING THE ENCLOSURE NETTING You will need the following parts to complete step 6: 1 x Enclosure netting - Part K Lay the enclosure netting out on the trampoline. Find the sleeves that run along the top of the enclosure netting.
- Page 16 Slot one of the Black G3 poles through three of the sleeves on the top of the enclosure netting. Slot the remaining Black G3 poles through the three other sleeves on the top of the enclosure netting. You will now join the two ends of the Black G3 will require two people.
- Page 17 You may need to slide the connected poles around in the nettings sleeves until the thin black sections are aligned with the gaps between sleeves. Stand on the trampoline and insert one of the exposed sections of the Black G3 pole into a plastic grip on top of one of the enclosure tubes.
- Page 18 STEP 7 : ATTACHING THE BOTTOM OF THE NET You will need the following parts to complete step 7: 4 x Cords - Part L . Tie the non-plastic end of the cord around a V-Ring. Push the red plastic end through a hole in the bottom of the netting.
- Page 19 USING THE TRAMPOLINE Before using your trampoline, check again that there is enough clearance around it. Maintain a clear space of 2.5 metres (8.2 feet) on all sides of the trampoline. Also check that the area is free from walls, 2.5m structures, fences, tarmac and other hard surfaces 8.2ft...
-
Page 20: Spare Parts
Self-tapping screw & spring washer 5.5” Springs User Manual Bottom enclosure pole Spring pulling tool Top enclosure pole G3 Poles For a full range of accessories and replacement parts call 0344 800 4060 or visit our web site at: www.jumpking.eu...