assembling the highchair Components list ......4 - 5 Attach backrest, footrest ..... 6 contents Attach legs .......... 7 Attach harness, meal tray ....8 using the highchair Highchair to lowchair ......9 Restraint system ........9 Storing meal tray ........ 10 care and maintenance Care and maintenance ......
Page 3
• Do not use the highchair if it is not working correctly and immediately seek repair. • Use only those accessories which are supplied by Dorel Australia and approved for use with this highchair. • This product is not intended for commercial use.
Step 1: join the backrest • Insert the posts of the backrest into the holes of the seat until the fixing mechanism clicks into place (Figure 1a). • Ensure that the outer posts go into the outer grooves and are forced through until they clip together. The inner posts will fit...
Step 3: to attach the legs • Join the lower leg (A) and upper leg (B) together, making sure that the pin and its hole are aligned. • Push the pin down with your thumb to slide into the slot (Figure 2a).
Step 4: to attach the harness 2 heights • Feed the harness shoulder straps through the backrest in the desired slots (Figure 3a). • There are two slot heights: adjust the shoulder straps to suit your child.
• Remove the upper leg sections (A) of each leg (Figure 4), and replace the lower leg section directly into the retaining post underneath the seat (using the same fixing brackets). to secure your child • The harness straps can be adjusted by moving...
• Always ensure meal tray is stored behind highchair when not in use. care and maintenance highchair and trays • Always store the unit in a clean and dry place. • Wipe with soft, damp cloth and warm, soapy water and allow to dry.
mother’s choice tip... follow us on motherschoice.com.au Visit us online to register your new Mother’s Choice product. www.motherschoice.com.au/product-registration benefits of registration • Your safety - allows us to contact you with important product notifications. • Confirmation of ownership - provides a record in case of product loss or theft. • Improved product development - helps us continue to design products that meet your needs. to prevent loss or fading, please attach your receipt here:...
Need help?
Do you have a question about the casper and is the answer not in the manual?
Questions and answers