Table of Contents
Advertisement
Prolon Control Systems
Network Variables
nviScene
LonMark network variable type name:
LonMark network variable type id:
nvoSceneValue
LonMark network variable type name:
LonMark network variable type id:
nviSetting
LonMark network variable type name:
LonMark network variable type id:
Configuration Properties
Scene Numbers
LonMark configuration property type:
LonMark configuration property name: UCPTsceneNumber
Applies to:
The list of scene number that will trigger sending one of the values in the UCPTsceneValue list.
The index of the scene number matches the index of the value, this means that it a scene recall is
received for the scene number in UCPTsceneNumber table index 4 the matching value from the
SCPTsceneValue table index 4 will be send.
Example: With the default configuration, if SC_RECALL 4 is received then the value 75% ON(1)
will be transmitted on the output.
Default value:
Scene Values
LonMark configuration property type:
LonMark configuration property name: SCPTsceneValue
Applies to:
The scene values defined for the scene numbers in the UCPTsceneNumber list.
Default value:
Lonbox PSW5000
SNVT_scene
115
SNVT_switch
95
SNVT_setting
117
10
Function Block
1,2,3,4,5,6,7,8,9,10
49
Function Block
0% OFF(0)
25% ON(1)
50% ON(1)
75% ON(1)
100% ON(1)
0% OFF(0)
0% OFF(0)
0% OFF (0)
0% OFF (0)
Users Manual
Page 9
Advertisement
Table of Contents
