Table of Contents
Advertisement
Prolon Control Systems
Switch
Function block name:
LonMark object type:
LonMark object name:
Number of blocks in device:
Principal network variable:
The switch function reflects the state of one or more connected switch button. Using the node
object digital inputs can be assigned to the Switch function and the functionality can be configured.
The function or the switch object is described in detail in the configuration description.
Network Variables
nviSwitchFb
LonMark network variable type name:
LonMark network variable type id:
For correct dimming start point this feedback should be connected to the lamp actuator output.
This will give information to the switch about lamp level when this is adjusted by another source,
for example light controller or another manual switch. When a dimming sequence starts the initial
output will be based on the last value received on the feedback or the last value that the switch has
send.
nvoSwitch
LonMark network variable type name:
LonMark network variable type id:
The output will send the switch level when updated. See the configuration chapter for details on
how the digital inputs will affect the switch output.
nvoSetting
LonMark network variable type name:
LonMark network variable type id:
The output will send the setting action and level when updated. See the configuration chapter for
details on how the digital inputs will affect the setting output.
Configuration Properties
Step
LonMark configuration property type:
LonMark configuration property name: SCPTstep
Applies to:
This configuration step size is used for dimming function of the switch. During dimming the step
size is incremented or decremented on the output every 400 millisecond.
Default value:
Lonbox PSW5000
"Switch"
3200
SFPTswitch
4-6
nvoSwitch (SNVT_switch)
SNVT_switch
95
SNVT_switch
95
SNVT_setting
117
92
Function Block
2.5 %
Users Manual
Page 7
Advertisement
Table of Contents
