Advertisement
3.3 Connecting Input Power
To connect input power
1.
Verify that the power cable is not energized.
2.
Loosen the
screw clamps
on the mating
power
connector.
3.
Strip the
insulation from
the power
cables.
4.
Secure the power cable to the mating
connector, noting polarity, and tighten the
screw clamps. The torque for the attaching
screws is 0.3 Nm (2.26 in-lb).
5.
Apply dc power to the unit. During normal
startup and operation, the QuickPanel
status LED indicator displays as follows:
•
•
6.
Once power is applied, the QuickPanel
begins initializing. The first thing to display is
the splash screen.
To skip running any programs included in the
StartUp folder, tap Don't run StartUp
programs. The Microsoft Windows
Embedded Compact 7 operating system
starts automatically.
18
Solid amber while the QuickPanel
is starting up
Solid green during normal operation
QuickPanel
Quick Start Guide
+
M2.5
Mounting clamps
FG
GND
Power Connector
M2
Screw clamps
+24 V dc
+
+
unit
+
GFK-2893K
Advertisement
