Advertisement
5. Product Certifications and Installation
Guidelines for Conformance
The QuickPanel
use in industrial environments and, when properly
installed, shall comply with the following agency
approvals.
5.1 Agency Approvals
Note: The agency approvals listed in the following
table and on the Declaration of Conformities are
believed to be accurate; However, the product's
agency approvals should be verified by the marking
on the unit itself.
Description
N.A. Safety for
Programmable Controller
for use in Hazardous
locations
Class I Division 2 Groups
A, B, C, D (applicable to
7'',10'',12'', 15'' Display
units)
Class I Division 2 Groups
A, B, C, D; Class 2
Division 2 Groups F, G;
Class 3 Division 1 and
Division 2 (applicable only
to 6'' Display unit)
Explosive Atmospheres
Directive European Safety
for Hazardous Areas
Equipment Group II,
Category 3, Gas Groups
IIC, Dust Group IIIC
Protection string:
II 3 G Ex nA IIC T4 Gc
II 3 D Ex tc lllC T100°C
(212 °F) Dc
Tamb 0 to 55°C
(32 to 131 °F)
34
+
Operator Interface is intended for
Agency
Marking
QuickPanel
Quick Start Guide
+
Comments
Certification by
Underwriter's
Laboratories (UL) to
UL 61010-1; UL 61010-
2-201;
CSA C22.2 No 142–
M1987;
CSA 61010-1;
CSA 61010-2-201
ISA 12.12.01 standard and
CSA C22.2 No 213-M1987
Certification in accordance
with the ATEX Directive
94/9/EC with an
Independent 3rd Party
Assessment Certificate
only applies to the 12" and
15" Display units:
EN 60079-0/A11,
EN 60079-15, and
EN 60079-31;
Part numbers
IC755CxS12CDBCA and
IC755CxS15CDACA
GFK-2893K
Advertisement
