Initial Startup - GE IC755CxS06RDx Quick Start Manual

3.

Initial Startup

Note: For installation requirements, complete
installation procedures, and operating
information, refer to the QuickPanel
Operator Interface User Manual (GFK-2847).
You will need the following:

A Safety Extra Low Voltage (SELV) and
Limited Energy Circuit or SELV and Class 2
dc power supply.

The power terminal block is supplied with the
product. For voltage and requirements, refer
to the Input Power specifications in the table,
General

The mating power terminal block supports
stranded 30 to 14 AWG (0.05 to 2.00 mm
wires. The user calculates proper gauge
wiring for current carrying capacity and loss
according to local regulations.

At a minimum, the cable must be rated for
75°C (167 °F) or more.
Warning
Warning
14
Specifications.
ELECTRICAL SHOCK HAZARD -
To avoid personal injury or
damage to equipment, ensure
that the dc supply is
disconnected from power and
the leads are not energized
before attaching them to the
unit's power supply plug.
If this equipment is used in a
manner not specified by the
manufacturer, the protection
provided by the equipment may
be impaired.
QuickPanel Quick Start Guide
+
+
2
)
GFK-2893K