GE IC755CxS06RDx Quick Start Manual page 27

4.5 VESA Arm Mounting
The QuickPanel
available Video Electronics Standards Association
(VESA) MIS-D arm, stand, or apparatus that complies
with the UL1678 standard.

To VESA mount the QuickPanel
the mounting holes located on the back of
the unit (displayed in the following figures).
The mounting holes for IC755CxS06RDx
and IC755CxW07CDx attach with M4 screws
that are 6 mm (0.24 in) or less in length.
The mounting holes for IC755CxSxxCDx
mounting holes attach with M4 screws that
are 8 mm (0.32 in) or less in length.
Torque Range for Mounting M4 Screws
Display Unit
IC755CxS06RDx
IC755CxW07CDx
IC755CxSxxCDx
GFK-2893K
+
can be installed on a commercially
Torque Range
0.7 to 0.8 Nm (6.2 to 7.1 in-lb)
0.7 to 0.8 Nm (6.2 to 7.1 in-lb)
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
QuickPanel Quick Start Guide
+
+
unit: use
27