Secondary Safety Devices - B&B ARMR LXL-15vp-SS Installation Manual

Installation and Operations Manual — LXL Gate Operator
9 1 amp fuse (processor protection)
10 Factory connections

7. Secondary Safety Devices

Connecting safety devices to the secondary safety connectors will stop the gate on the detection
of the safety and proceed in the event of clearing the safety. To reverse the gate on the event of a
safety, you must connect the safety device to the loopsafe terminal on connector 3.
*Note: The ROAD and BACK connections are normally open connections
UL Approved Secondary Safety Devices:
Miller Edge - manufacturer of contact sensors for all types of gates (800-220-EDGE).
website: http://www.milleredge.com
EMX Industries - manufacturer of non-contact sensors for gates (800-426-9912).
website: http:// www.emxinc.com
B&B ARMR
A Division of B&B Roadway and Security Solutions
IMPORTANT
NOTE:
UL 325 approved secondary
safety devices MUST be
used for the gate installation
to comply with the
requirements of UL 325.
Refer to the UL approved
manufacturer's
documentation for proper
installation of secondary
safety devices.
0054-9001UL Revision A2
26