Install Limit Switch Trip Plates - B&B ARMR LXL-15vp-SS Installation Manual

Installation and Operations Manual — LXL Gate Operator

4.4 Install Limit Switch Trip Plates

B&B ARMR
A Division of B&B Roadway and Security Solutions
1. Slide the gate to the full open position.
2. On the top of the drive rail, place a trip
plate so that the last 2" is in front of the
proximity switch.
3. Mark and drill holes. Mount limit switch
as shown under drive rail.
4. Repeat for the close position
Note: Maintain a distance of 1/4" between
proximity switch and limit plate. Adjust
switch away from operator if necessary.
16
0054-9001UL Revision A2