Non-Standard Film Sizes - Epson Expression 12000XL User Manual

User's Guide
Using the Transparency Unit
3. Close the cover. Repeat steps 1 to 3 for all the films you want to scan.
4. Place the holder on the scanner glass and align it with the notch on the transparency guide, as shown below.

Non-standard film sizes

Place the film directly on the scanner glass, making sure the glossy (smooth) side of the film is facing down.
If the document mat is installed in the Transparency Unit, remove it. Close the Transparency Unit.
Note:
❏ An area 17.0 ±0.5 mm from the horizontal and 2.0 ±0.5 mm from the vertical edges of the scanner glass cannot be
scanned.
❏ When you place the film directly on the scanner glass, make sure you set the focus position to 0.0 in Epson Scan 2.
48