Setting Up And Using The Home Screen Applications; Finding The Ip Address Of The Computer; Finding The Ip Address Of The Printer; Accessing The Embedded Web Server - Lexmark CS510 User Manual

Setting up and using the home screen applications

Setting up and using the home screen
applications
Notes:
•
Your home screen may vary depending on your home screen customization settings, administrative
setup, and active embedded applications. Some applications are supported only in some printer models.
•
There may be additional solutions and applications available for purchase. For more information, go to
www.lexmark.com

Finding the IP address of the computer

For Windows users
In the Run dialog box, type cmd to open the command prompt.
1
Type ipconfig, and then look for the IP address.
2
For Macintosh users
1
From System Preferences in the Apple menu, select Network.
2
Select your connection type, and then click Advanced > TCP/IP.
3
Look for the IP address.

Finding the IP address of the printer

Note: Make sure your printer is connected to a network or to a print server.
You can find the printer IP address:
•
From the top left corner of the printer home screen.
•
From the TCP/IP section in the Network/Ports menu.
•
By printing a network setup page or menu settings page, and then finding the TCP/IP section.
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

Accessing the Embedded Web Server

The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings
even when you are not physically near the printer.
1
Obtain the printer IP address:
•
From the printer control panel home screen
•
From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
or contact the place where you purchased the printer.
17