JC Systems 620A Reference Manual page 25

Page 5: CH1 Deviation:
Page 6: CH2 Deviation:
Page 7: Programmer SYNC and SOFT START.
Line 1: Display only.
Line 2: Select action during CH1 DEV alarm.
PROGRAM RUNS or PROGRAM STOPS
Line 3: Display only.
Line 4: Select CH1 alarm reset action.
AUTOMATICALLY or MANUALLY
Line 1: Display only.
Line 2: Select action during CH2 DEV alarm.
PROGRAM RUNS or PROGRAM STOPS
Line 3: Display only.
Line 4: Select CH2 alarm reset action.
AUTOMATICALLY or MANUALLY
Line 1: Display only.
Line 2: Select programmer SYNC function.
DISABLED (default) or ENABLED
Line 3: Display only.
Line 4: Select programmer SOFT START function.
DISABLED or ENABLED (default)