Product Installation - Haier HYCD-282 Operation Manual

Rechargeable Battery Recycling
Install a recyclable charging battery in refrigerator-freezer, and when it is to achieve the service life,
please contact local battery recycle agent for inspection, or correctly discard the battery.
Position of battery
The battery in refrigerator-freezer is for power outage alarm, and it is in electric cabinet.
Electric cabinet has high voltage electrical apparatus element.
To prevent electric shock, the cover should be opened by professional engineer or
maintenance man.
Take out the battery
1. Unplug power plug from socket;
2. Remove the screws from electric cabinet cover by screw driver;
3. Unplug the connection plug of battery;
4. Dismantle the fixed clamp of battery, and take out battery;
5. Recycle or correctly dispose battery as required.
When replacing battery, make sure the brown wire is connected to battery anode, blue wire
is connected to battery cathode. Or it is easy to burn the charging circuit of computer board,
which will not be able to charge battery.
The brown wire is connected to battery anode
The blue wire is connected to battery cathode
22

Product Installation

Installation environment
Environment temperature: 16°C to 32°C, the ideal temperature is 18°C to 25°C, and air
conditioning system should be used when necessary.
Environment humidity: Lower than 75%Rh.
To avoid a great deal of dust.
To avoid mechanical swing or vibration.
The altitude of working position of refrigerator-freezer: Lower than 2,000m.
Input voltage: Within 220V ± 10%.
Refrigerator-freezer is sensitive to environment temperature. Refrigerator-freezer
can't work normally if it is installed in other environment. Please use after
environment improvement.
It is not allowed to install refrigerator-freezer outdoor. When the
refrigerator-freezer is drenched by rain, it may cause electric leakage or
electric shock.
Installation site
To enable the refrigerator-freezer to work normally and obtain best performance, the installation site
of refrigerator-freezer should meet the following conditions:
It can't be installed in small airtight space, and the door of room for placement should not be
smaller or lower than this product, it should at least allow normal in and out of product, or it may
be hard to repair fault machine, nor timely recover machine and cause stored goods damage.
Installation ground must be firm and flat.
Good ventilation, avoid direct sunshine.
Don't share socket with other equipment plug, plug and socket should be firmly connected.
Don't bend or press power wire.
If the power wire should be lengthened, the sectional area of extension cord should not be less
than 3mm², and not be longer than 3m.
Inspect the working voltage before use, voltage regulator with proper motor load should be
considered in area with unstable voltage. To enable the normal input voltage as 220V ± 10%, the
power of voltage regulator should be greater than 400W.
Refrigerator-freezer should be reliably earthed.
If power socket has ground wire, check whether it is well earthed before use.
If the power socket doesn't have ground wire, be sure to install the ground wire by professional t
echnician.
Refrigerator-freezer should not be grounded through gas pipe, water supply
tube, telephone line or lightning rod, or it may cause electric shock.
The power plug must be accessible after installation, so that it can be unplugged
in emergency. Nothing can block the ventilation opening of refrigerator-freezer.
7