Product Installation - Haier HYC-68 Operation Manual

Product Installation

Installation environment
• Ambient temperature: 16 ℃ to 32 ℃ , 18 ℃ to 25 ℃ are optimal and air conditioning system is
required as necessary.
• Ambient humidity: HYC-68A: below 70%Rh;HYC-68:below 75%Rh;HYC-118/118A:below 85%Rh.
• Avoid excessive dust.
• Avoid mechanical swing or vibration.
• The refrigerator shall operate at an altitude lower than 2000m.
• Input voltage: no greater than ±10% of rated voltage.
•Normal operation will be impossible for refrigerator if it is installed in environments
Caution
other than those described above as it is sensitive to ambient temperature. Start
operation after the environment is improved.
•It is prohibited to install the refrigerator outdoor. Electric leakage or shock may
be caused if the refrigerator gets wet by rainwater.
Installation Site
The installation site shall meet following requirements for normal operation and best performance of
refrigerator:
• Do not install the refrigerator in a narrow and confi ned space and the door of the installation space
may not be smaller or lower than the refrigerator, to ensure smooth entry and exit of the refrigerator
as well as to prevent damage to the stored articles due to not timely repair of refrigerator as the
installation site is not easy to be accessed.
• The ground at the installation site shall be solid and fl at.
• It is well ventilated and free from direct sunshine.
• Do not share the same power outlet with other equipment. The power plug must be plugged into
the outlet securely.
• Do not twist or compress the power line.
• If the power line needs to be extended, the extended line shall be no smaller than 3mm² in
sectional area and no longer than 3m.
• Check the operating voltage before operation and voltage regulator appropriate for motor load
may be applied in regions with unstable voltage.Ensure the normal input voltage stands at rated
voltage ± 10% and the power of voltage regulator is greater than 400W.
• The refrigerator shall be grounded in a reliable manner.
• If the socket is provided with grounding wire, check if it is well grounded before operation.
• If the socket is not provided with grounding wire, a new one shall be installed by professional
engineers.
• Do not ground the refrigerator through gas pipes, water supply pipes, telephone
Warning
.lines or lightning conductors as electric shock may be caused.
• The power plug should be accessed after installation to ensure the power line can be
pulled immediately in case of an emergency. The air vents should be free from any
obstruction.
7