International Safety Symbols - Extech Instruments IR267 User Manual

Safety
International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the user must refer to the
manual for further information
Warnings
o
Do not directly or indirectly point the laser at the eyes of a person or an animal
o
Inspect for damage or for any shortage of parts or accessories before use
o
Replace the battery immediately after the battery indicator flashes
o
Do not connect an external probe to live electrical circuits
o
Do not submerge in water
o
Do not leave the thermometer on or near objects of high temperature
o
Do not use the thermometer near explosive gases, steam, or dust
o
Note that an object with high reflectivity will normally cause the measured temperature
value to read much lower than the actual temperature
o
Use the device only as described in this User Guide
Cautions
To avoid thermometer damage, please avoid the following hazards:
o
EMF from welding equipment or electro‐induction heaters
o
Static electricity
o
Thermal shock caused by large or abrupt environmental
temperature changes; wait 30 minutes to allow the
thermometer to stabilize to new environmental conditions
o
Do not use this device in excessively high temperature environments
o
If the meter is to be stored for a long period of time the battery should be removed to
prevent damage to the unit
800.561.8187
3
www. .com
<1mW Output at 650nm
IR267‐en‐GB_v1.1 8/16
information@itm.com