DSC PC1580BABT Installation Manual page 37

[62] Third User Display Mask
Default Option
ON 1
I _ ______ I
ON 2
I _ ______ I
ON 3
I _ ______ I
ON 4
I _ ______ I
ON 5
I _ ______ I
ON 6
I _ ______ I
ON 7
I _ ______ I
ON 8
I _ ______ I
[63] Downloaded LCD Message Duration
Default
003
I _ _____I _ _____I _ _____ I
the Downloaded message is cleared by pressing any key while the message is up after timeout)
[64] Key Options
Default Option
ON 1
I _ ______ I
ON 2
I _ ______ I
ON 3
I _ ______ I
OFF 4-8
I _ ______ I
[65] Fourth User Display Mask
Default Option
ON 1
I _ ______ I
ON 2
I _ ______ I
ON 3
I _ ______ I
[66] Keypad Options
Default Option
1
ON
I _ ______ I
2
ON
I _ ______ I
3-8
OFF
I _ ______ I
[97] View Software Version
[98] Initiate Global Label Broadcast
All LCD programming is done per keypad. If more than one LCD keypad are present on the system, labels programmed at one
keypad can be broadcast to all other LCD keypads. Perform the following procedure in order to broadcast labels:
Step 1 - Program one LCD keypad completely.
Step 2 - Make sure all LCD keypads are connected to the KEYBUS.
Step 3 - Enter Installer's Programming, then enter Section [98] at the keypad that was programmed. The keypad will now broadcast
all the information programmed to all the other LCD keypads on the system.
Step 4 - When the keypad is finished press the [#] key to exit.
[99] Reset LCD EEPROM to Factory Defaults
ON
System Test prompt ON
Time and Date prompt ON
Auto-Arm Control prompt ON
Auto-Arm Time prompt ON
Download Enable prompt ON
Bright Control prompt ON
Contrast Control prompt ON
Buzzer Control prompt ON
(Valid entries are 000-255, 000=Unlimited Message Display. This number represents the number of times
ON
[F]ire Keys enabled
[A]uxiliary Keys enabled
[P]anic Keys enabled
For Future Use
ON
User Initiated Call-up Prompt ON
Last Code to Disarm/Arm Prompt ON
Walk Test Prompt ON
ON
Display Access Code when Programming Display 'X' when Programming
Local Clock Display Enabled
For Future Use
OFF
System Test prompt OFF
Time and Date prompt OFF
Auto-Arm Days promptOFF
Auto-Arm Time prompt OFF
Download Enable prompt OFF
Bright Control prompt OFF
Contrast Control prompt OFF
Buzzer Control prompt OFF
OFF
[F]ire Keys disabled
[A]uxiliary Keys disabled
[P]anic Keys disabled
OFF
User Initiated Call-up Prompt OFF
Last Code to Disarm/Arm Prompt OFF
Walk Test prompt OFF
OFF
Local Clock Display Disabled
37