Before You Get Started; Quick Start - Concert CDP2400USB User Manual

CONCERT CDP2400USB User Manual
1.

Before you get started

1.1 Shipment
Your CDP2400USB was carefully packed at the factory, and the
packaging was designed to protect the unit from rough handling.
Nevertheless, we recommend that you carefully examine the
packaging and its contents for any signs of physical damage that
may have occurred during transit.
◊
If the unit is damaged, please do NOT return it to
BEHRINGER. Instead, notify your dealer and the shipping
company immediately. Otherwise, claims for damage or
replacement may not be honored.
◊
Always use the original packing carton to prevent damage
during storage or transport.
◊
Make sure that no children are left unsupervised with the
CDP2400USB or its packaging.
◊
Please ensure proper disposal of all packing materials.
1.2 Initial operation
Be sure that there is enough space around the unit for cooling and
please do not place the CDP2400USB on high temperature devices
such as radiators etc. to avoid overheating.
◊
Blown fuses must be replaced by fuses of the same type and
rating! Please refer to the "SPECIFICATIONS" for details.
The mains connection of the CDP2400USB is made by using the
enclosed mains cable and a standard IEC receptacle. It meets all of
the international safety certification requirements.
◊
Please make sure that all units have a proper ground
connection. For your own safety, never remove or disable
the ground conductor from the unit or of the AC power
cord.
◊
The CDP2400USB is an electronic piano. Unlike an acoustic
piano, this instrument does not need to be tuned.
◊
The sound quality may diminish within the range of
powerful broadcasting stations and high-frequency
sources. Increase the distance between the transmitter and
the device and use shielded cables for all connections.
1.3 Online registration
Please do remember to register your new BEHRINGER equipment
right after your purchase by visiting http://www.behringer.com
(alternatively www. behringer. de) and kindly read the terms and
conditions of our warranty carefully.
Should your BEHRINGER dealer not be located in your vicinity, you
may contact the BEHRINGER distributor for your country listed
under "Support" at www.behringer.com. Should your country
not be listed, please check if your problem can be dealt with by
our "Online Support" which may also be found under "Support"
at www.behringer.com. Alternatively, please submit an online
warranty claim at www.behringer.com BEFORE returning the
product.
Registering your purchase and equipment with us helps us process
your repair claims quicker and more efficiently.
Thank you for your cooperation!
2.

Quick Start

2.1 Power on/off
The CDP2400USB is a digital, i.e. electronic, piano. Therefore,
mains power is required to operate the instrument and it has to be
switched on or off. The following section describes how to connect
the unit to the mains.
◊
The POWER switch to the left of the keyboard must be in the
"off" position when you connect the unit to the mains.
FUSE HOLDER / IEC RECEPTACLE
The CDP2400USB is connected to the mains using a standard IEC
receptacle. All required safety regulations have been adhered to. A
matching power cable is included with the unit. Blown fuses must
be replaced with a fuse of the same type and rating.
1) Connect the power cable supplied with the unit to the
connector provided on the underside of the instrument and
to a wall socket
2) Press the POWER switch to the left of the keyboard to switch
the instrument on or off. The LED on the front panel lights up
when the CDP2400USB is ready for operation.
◊
After playing, switch off the unit with the POWER switch.
The POWER LED on the front panel will go out. Please note:
Merely switching the unit off does not mean that it is fully
disconnected from the mains. If you do not plan to use your
piano for a prolonged period of time, please disconnect it
from the mains by unplugging the power cable from the
wall outlet.
3