Setting The Volume Of Muted Tracks - Concert CDP2400USB User Manual

16
3) Press the MODE button in the TEMPO/EDIT MODE section
when the playback has reached the point from which you
want to start repeating a passage.
The display reads:
Starting point of the loop is set.
A-:
4) Press the MODE button again when the playback reaches the
point where you want to end the repetition of a passage.
The display reads:
Ending point of the loop is set.
A-b:
The musical passage is now repeated continuously, so that you can
practice it to perfection
5) When you want to stop practicing, press the
again to stop the playback.
◊
Press the MODE button again to quit repetition mode.
◊
The passage marked as a loop for repetition is automatically
erased when you quit music sequencer mode.
5.4.5

Setting the volume of muted tracks

1) This function allows you to set the volume of muted tracks.
◊
Please enter EDIT mode (see chapter 5.1) and select the
following function.
Function:
E6
Value:
0 . . . 20
Description:
Volume of muted track
1 . . . 20:
Muted tracks are not audible
0:
5.4.6 Editing the music sequencer settings
The following paragraphs explain how to edit the playback settings
of recordings made with the music sequencer.
The following settings can be edited separately for each of the
two tracks:
•
Sound (see chapter 2.4)
•
Room effect intensity (see chapter 4.2.2)
•
Modulation effect intensity (see chapter 4.2.3)
•
Layered sounds (see chapters 4.1 and 5.3)
The following global settings can be made for the whole music
piece:
•
Tempo (see chapter 5.4)
•
Meter (see chapter 5.4)
•
Type of room effect (see chapter 4.2.2)
•
Type of modulation effect (see chapter 4.2.3)
1) Press the REC button in the SEQUENCER section to enter
record mode. The REC LED above the TRACK 1 or TRACK 2
buttons lights up and the dots in the display start flashing in
the rhythm of the selected metronome tempo, thus indicating
the beat.
button
◊
Be sure not to press the
steps. Otherwise, a new recording would be made on the
selected track erasing all the data recorded before.
2) Use the TRACK button to select the track whose settings you
wish to edit. If you want to edit global settings (e.g. tempo,
measure, etc.) you can select either one of the two tracks.
CONCERT CDP2400USB User Manual
button during the following