User Maintenance For The Shaving Foils; Replacing Wearable Parts - ALDI easy home User Manual

13. Use the On/Off switch to switch the shaver off with-
out the shaver head for approx. 5 – 10 seconds in or-
der to dispel water drops from the shaver blades
14. Use a lint-free cloth or a paper towel to thoroughly
dry off the shaver.
15. Firmly mount the shaver head
that the locking mechanism locks into place (see fig. F).
16. Place the protective cap
The shaver is now ready for use again.

User maintenance for the shaving foils

To maintain the performance of your shaver and in-
crease the service life of the shaving foils, you should
perform user maintenance on the shaving foils every
two months as follows:
1. Put a drop of fine, non-resinous household oil on
the tip of your finger.
2. Distribute the oil evenly on the shaving foils.
3. Without applying pressure, dab the shaving foils
with a soft, lint-free cloth or paper towel.

Replacing wearable parts

Ordering wearable parts
You can order a new shaving foil unit and shaver blades
to replace worn ones.
To place your order, contact the address provided on
the order form.
AFTER SALES SUPPORT
Cleaning and maintenance
1
on the shaver.
877 368 8246
USA
2
on the shaver so
TM3Service@outlook.com
USA
4
.
27