Weekly Cleaning - ALDI ViSage User Manual

11. Firmly mount the shaver head on the shaver until the
locking mechanism audibly engages (see fig. E).
12. Place the protective cap
The shaver is now ready for use again.

Weekly cleaning

It is recommended that you thoroughly clean the sha-
ver once a week. To do so, proceed as follows:
1. Use the On/Off switch
2. Before cleaning, pull the 5 V plug
shaver.
3. Hold the shaver over the sink.
4. Depress both release buttons
shaver head
5. Pull the shaver head up and off.
6. Tap the shaver head gently over a sink to remove any
hair.
7. Thoroughly wash the shaver head under warm
running water from the inside and outside
(see fig. F).
8. Carefully dry the shaver head with a lint-free cloth
or a paper towel. In the process, do not push the
shaving foils in.
9. Without the shaver head mounted, use the On/Off
5
switch
seconds to dispel any hair from the shaver blades
10. Switch the shaver back off.
AFTER SALES SUPPORT
Cleaning and maintenance
5
2 (see fig. D).
to switch the shaver on for approx. 5–10
GB
00800 - 36 46 36 00
IRE
on the shaver.
1
to switch the shaver off.
out of the
8
4 to release the
www.aquarius-service.com
GB IRE
3
.
23