Handling; Dry Shave - ALDI easy home User Manual

2. Connect the AC adapter plug
stalled socket.
The grid symbol
to indicate that the battery is charging. The battery
12
symbol
geable battery is fully charged.
3. To charge the shaver, place it on a dry and level sur-
face or shave in grid mode.

Handling

Dry shave

NOTICE!
We recommend a dry shave before you
wash. After washing, you skin is slightly
swollen. As a result, shavers are often un-
able to reach the entire length of your beard
hair so the shave will be less thorough.
For a dry shave, follow the steps below:
1. Take the protective cap
(see fig. A).
2. Use the On/Off switch
3. Use your free hand to stretch the part of your face
you intend to shave.
4. Apply gentle pressure to move the shaver head
perpendicular to the direction of hair growth.
5. After a few strokes, use your free hand to check the
results and repeat step 4 if necessary.
AFTER SALES SUPPORT
13
on the handle illuminates in red
flashes in green as soon as the rechar-
5
877 368 8246
USA
10
in a properly in-
1
off of the shaver
to turn the shaver on.
TM3Service@outlook.com
USA
Handling
2
19