Vehicle Engine Control Unit Reset Procedure - Mazda CX-5 2017 Manual

Maintenance and Care
Owner Maintenance

▼ Vehicle Engine Control Unit Reset Procedure

NOTE
This procedure is intended for vehicles with SKYACTIV-D 2.2 and vehicles with
SKYACTIV-G 2.0 or SKYACTIV-G 2.5 which the engine oil flexible maintenance setting is
selected.
After replacing the engine oil, have a repair shop such as an Authorized Mazda Dealer
perform the initialization (engine oil data resetting) of the recorded value. If the value
recorded by the computer is not initialized, the wrench indicator light may not turn off or it
may turn on earlier than normal.
NOTE
The initialization (engine oil data resetting) of the recorded value can be performed using
the following procedure:
1. Switch the ignition OFF.
2. Switch the ignition ON with the dashboard illumination knob pressed, and press and
hold the dashboard illumination knob for about 5 seconds until the master warning light
flashes.
3. After the master warning light
completed.
6-26
CX-5_8GB6-EA-17G_Edition1
Dashboard illumination knob
flashes for several seconds, the initialization is
2017-5-18 10:43:27