Mazda CX-5 2017 Manual page 589

Warning/Indicator Lights and Warning Sounds
▼ Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) System
*
Warnings
The Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) system warnings notify the
driver of system problems and precautions
on use when required. Check after hearing
a warning beep sound.
Warning beep
While the Mazda Radar
Cruise Control with Stop
& Go function (MRCC
with Stop & Go func-
tion) system is operating,
a single beep sound is
heard when "Front radar
blocked" is displayed in
the multi-information
display.
The beep sounds inter-
mittently while the vehi-
cle is being driven.
While the Mazda Radar
Cruise Control with Stop
& Go function (MRCC
with Stop & Go func-
tion) system is operating,
a single beep sound is
heard when "Front radar
sensor system malfunc-
tion" is displayed in the
multi-information dis-
play.
CX-5_8GB6-EA-17G_Edition1
What to check
Cancel the Mazda Radar
Cruise Control with Stop
& Go function (MRCC
with Stop & Go func-
tion) system if the radar
sensor (front) becomes
dirty. Clean the area
around the radar sensor
(front).
The distance between
your vehicle and the ve-
hicle ahead is too close.
Verify the safety of the
surrounding area and re-
duce vehicle speed.
A malfunction in the
system may be indicated.
Check the center display
to verify the problem
and then have your vehi-
cle inspected by an Au-
thorized Mazda Dealer.
If Trouble Arises
7-49
*Some models.
2017-5-18 10:43:27