Wrench Indicator Light; Low Engine Coolant Temperature Indicator Light (Blue) - Mazda CX-5 2017 Manual

▼ Wrench Indicator Light

When the ignition is switched ON, the
wrench indicator light turns on and then
turns off after a few seconds.
The wrench indicator light turns on under
the following conditions:
When the preset maintenance period has
•
arrived.
When it's time to replace the engine oil.
•
Refer to Maintenance Monitor on page 6-
17.
SKYACTIV-D 2.2
The engine computer monitors the
condition of the engine oil, and the wrench
indicator light turns on when the oil
replacement period has come.
Check the engine oil. Refer to Inspecting
Engine Oil Level on page 6-27.
Replace the engine oil if the wrench
indicator light does not turn off even
though the engine oil level is in the normal
range.
CX-5_8GB6-EA-17G_Edition1
Instrument Cluster and Display
NOTE
Depending on the vehicle use
•
conditions, the wrench indicator light
may turn on for reasons other than the
preset maintenance period.
Whenever the engine oil is replaced, a
•
reset of the vehicle engine control unit is
necessary.
Your Authorized Mazda Dealer will be
able to reset the engine control unit or
see page 6-26 for the Vehicle engine
control unit reset procedure.
▼ Low Engine Coolant Temperature
Indicator Light (Blue)
The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.
When Driving
*
4-39
*Some models.
2017-5-18 10:43:27