Mazda CX-5 2017 Manual page 442

Interior Features
Audio Set [Type B (touchscreen)]
Voice Recognition
▼ Basic Operation Method
Activating Voice Recognition
Press the talk button.
Ending Voice Recognition
Use one of the following methods:
Press the hang-up button.
•
Say, "Cancel".
•
Operate the commander switch or the
•
center display (only when vehicle is
stopped).
Skipping Voice Guidance (for faster
operation)
Press and release the talk button.
Troubleshooting for Voice Recognition
If you do not understand an operation
method while in the voice recognition
mode, say "Tutorial" or "Help".
Commands useable anytime during
voice recognition
"Go Back" and "Cancel" are commands
which can be used at anytime during voice
recognition.
Returning to previous operation
To return to the previous operation, say,
"Go Back" while in voice recognition
mode.
Cancel
®
To put the Bluetooth Hands-Free system
in standby mode, say, "Cancel" while in
voice recognition mode.
5-114
CX-5_8GB6-EA-17G_Edition1
To prevent a deterioration in the voice
recognition rate and voice quality, the
following points should be observed:
The voice recognition cannot be
•
performed while voice guidance or the
beep sound is operating. Wait until the
voice guidance or the beep sound is
finished before saying your commands.
Phone related commands are available
•
only when your phone is connected via
®
Bluetooth . Make sure your phone is
connected via Bluetooth
operate phone related voice commands.
Music play commands, such as Play
•
Artist and Play Album can be used only
in USB audio mode.
Do not speak too slowly or loudly (no
•
loud voice).
Speak clearly, without pausing between
•
words or numbers.
Dialects or different wording other than
•
hands-free prompts cannot be
recognized by voice recognition. Speak
in the wording specified by the voice
commands.
It is not necessary to face the
•
microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
Close the windows and/or the moonroof
•
to reduce loud noises from outside the
vehicle, or turn down the airflow of the
climate control system while Bluetooth
Hands-Free is being used.
Make sure the vents are not directing air
•
up towards the microphone.
NOTE
If the voice recognition performance is not
satisfactory.
Refer to Troubleshooting on page 5-120.
®
before you
®
2017-5-18 10:43:27