Matrox DualHead2Go User Manual page 4

Attach the Matrox cable
2
Attach one end of the cable provided with
your Matrox product to the graphics
connector on your computer. Attach the
other end of the cable to the input connector
( ) on your Matrox product.
Connect the first monitor
3
Use your monitor cable to connect your first
monitor to the main connector (
your Matrox product.
Connect the second monitor
4
Use your monitor cable to connect your
second monitor to the secondary connector
( ) on your Matrox product.
Connect the USB cable
5
Plug one end of the USB cable provided with
your Matrox product into the USB
connector (
Plug the other end of the USB cable into a
powered USB port on your computer. For
more information on powered USB ports,
see your system manual.
Note:
To purchase a Matrox power adapter for your product, see the Matrox online store
(http://shopmatrox.com).
Your Matrox product is now connected. Restart your computer and install your Matrox software
"Software setup", page
4 Matrox DualHead2Go – User Guide
) on your Matrox product.
If your computer doesn't have a powered USB port, you'll need a separate adapter.
7).
) on
Monitor cable
(HD-15)
USB cable
Matrox cable
Monitor cable
(HD-15)
(see